4 erstatnings løsninger fundet

Eksisterende pumpe - Trykstigning

Fabrikat Grundfos
Produkt navn CRE 3-4
Byggelængde 160 mm
Spænding 3x400 V
Pumpehusgange/-flange Rp 25 PN16
Nominel effekt 0,55 kW
Pumpehøjde 486 mm
Midt rør/gulv 50 mm

Udskiftningspumpe Udskiftningblad

Produkt navn Helix2.0-VE 404-1/16/E/S/3
Artikelnummer 4250688
MEI ≥ 0,7
IE 5
Byggelængde 160 mm
Spænding 3x400 V
Pumpehusgange/-flange Rp 25 PN16
Nominel strøm 1,6 A
Nominel effekt 0,75 kW
Pumpehøjde 732 mm
Midt rør/gulv 50 mm
Medietemperatur -30 - +120 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Replacement pump not equiped with cartridge mechanical seal.
Erstatningspumpe har højere kapacitet.

Produktinformation
Helix2.0-VE 404-1/16/E/S/3

Helix2.0-VE 404-1/16/E/S/3
Artikelnummer : 4250688
VVS-nummer :

Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.

Dine fordele
  • IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
  • Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
  • Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
  • Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit Helix 2-16
Artikelnummer: 4146788
VVS-nummer:
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_U
Artikelnummer: 4157154
VVS-nummer:
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikelnummer: 500814696
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR
Artikelnummer: 2007147
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikelnummer: 2109467
VVS-nummer:
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVI
Artikelnummer: 2504386
VVS-nummer:

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikelnummer: 2521150
VVS-nummer:

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA
Artikelnummer: 2541618
VVS-nummer:
PRESS.SENSOR 1/4"0-10BAR 4-20M
Artikelnummer: 2541619
VVS-nummer:
PRESS.SENSOR 1/4" 0-16 BAR
Artikelnummer: 2541620
VVS-nummer:
Dryrun prot, adjustable 0,083-1,1 bar
Artikelnummer: 2835151
VVS-nummer:
Cable gland M20x1,5 CIF-Module
Artikelnummer: 2215131
VVS-nummer:
Cable gland M12 RJ45 CIF-Module Ethernet
Artikelnummer: 2215132
VVS-nummer:
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:
CIF-Modul BACnet
Artikelnummer: 2190367
VVS-nummer: 381278300

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul CAN
Artikelnummer: 2190369
VVS-nummer: 381278301

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul LON
Artikelnummer: 2190370
VVS-nummer: 381278302

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus
Artikelnummer: 2190368
VVS-nummer: 381278303

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul PLR
Artikelnummer: 2190371
VVS-nummer: 381278304

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikelnummer: 2211408
VVS-nummer: 381278310

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikelnummer: 2211409
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikelnummer: 4194670
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikelnummer: 2501886
VVS-nummer:

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.

Udskiftningspumpe Udskiftningblad

Produkt navn Helix2.0-VE 404-1/16/E/KS/3
Artikelnummer 4250686
MEI ≥ 0,7
IE 5
Byggelængde 160 mm
Spænding 3x400 V
Pumpehusgange/-flange Rp 25 PN16
Nominel strøm 1,6 A
Nominel effekt 0,75 kW
Pumpehøjde 783 mm
Midt rør/gulv 50 mm
Medietemperatur -30 - +120 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Replacement pump equiped with cartridge mechanical seal.
Erstatningspumpe har højere kapacitet.

Produktinformation
Helix2.0-VE 404-1/16/E/KS/3

Helix2.0-VE 404-1/16/E/KS/3
Artikelnummer : 4250686
VVS-nummer :

Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.

Dine fordele
  • IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
  • Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
  • Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
  • Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit Helix 2-16
Artikelnummer: 4146788
VVS-nummer:
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_U
Artikelnummer: 4157154
VVS-nummer:
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikelnummer: 500814696
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR
Artikelnummer: 2007147
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikelnummer: 2109467
VVS-nummer:
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVI
Artikelnummer: 2504386
VVS-nummer:

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikelnummer: 2521150
VVS-nummer:

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA
Artikelnummer: 2541618
VVS-nummer:
PRESS.SENSOR 1/4"0-10BAR 4-20M
Artikelnummer: 2541619
VVS-nummer:
PRESS.SENSOR 1/4" 0-16 BAR
Artikelnummer: 2541620
VVS-nummer:
Dryrun prot, adjustable 0,083-1,1 bar
Artikelnummer: 2835151
VVS-nummer:
Cable gland M20x1,5 CIF-Module
Artikelnummer: 2215131
VVS-nummer:
Cable gland M12 RJ45 CIF-Module Ethernet
Artikelnummer: 2215132
VVS-nummer:
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:
CIF-Modul BACnet
Artikelnummer: 2190367
VVS-nummer: 381278300

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul CAN
Artikelnummer: 2190369
VVS-nummer: 381278301

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul LON
Artikelnummer: 2190370
VVS-nummer: 381278302

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus
Artikelnummer: 2190368
VVS-nummer: 381278303

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul PLR
Artikelnummer: 2190371
VVS-nummer: 381278304

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikelnummer: 2211408
VVS-nummer: 381278310

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikelnummer: 2211409
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikelnummer: 4194670
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikelnummer: 2501886
VVS-nummer:

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.

Udskiftningspumpe Udskiftningblad

Produkt navn Helix2.0-VE 204-1/16/E/S/3
Artikelnummer 4250638
MEI ≥ 0,7
IE 5
Byggelængde 160 mm
Spænding 3x400 V
Pumpehusgange/-flange Rp 25 PN16
Nominel strøm 1,2 A
Nominel effekt 0,55 kW
Pumpehøjde 720 mm
Midt rør/gulv 50 mm
Medietemperatur -30 - +120 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Replacement pump not equiped with cartridge mechanical seal.
Replacement pump has lower flow. Check duty point.

Produktinformation
Helix2.0-VE 204-1/16/E/S/3

Helix2.0-VE 204-1/16/E/S/3
Artikelnummer : 4250638
VVS-nummer :

Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.

Dine fordele
  • IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
  • Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
  • Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
  • Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit Helix 2-16
Artikelnummer: 4146788
VVS-nummer:
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_U
Artikelnummer: 4157154
VVS-nummer:
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 16BAR
Artikelnummer: 2007147
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikelnummer: 2109467
VVS-nummer:
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVI
Artikelnummer: 2504386
VVS-nummer:

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikelnummer: 2521150
VVS-nummer:

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA
Artikelnummer: 2541618
VVS-nummer:
PRESS.SENSOR 1/4" 0-16 BAR
Artikelnummer: 2541620
VVS-nummer:
PRESS.SENSOR 1/4"0-25BAR 4-20M
Artikelnummer: 2541621
VVS-nummer:
Dryrun prot, adjustable 0,083-1,1 bar
Artikelnummer: 2835151
VVS-nummer:
Cable gland M20x1,5 CIF-Module
Artikelnummer: 2215131
VVS-nummer:
Cable gland M12 RJ45 CIF-Module Ethernet
Artikelnummer: 2215132
VVS-nummer:
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:
CIF-Modul BACnet
Artikelnummer: 2190367
VVS-nummer: 381278300

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul CAN
Artikelnummer: 2190369
VVS-nummer: 381278301

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul LON
Artikelnummer: 2190370
VVS-nummer: 381278302

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus
Artikelnummer: 2190368
VVS-nummer: 381278303

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul PLR
Artikelnummer: 2190371
VVS-nummer: 381278304

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikelnummer: 2211408
VVS-nummer: 381278310

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikelnummer: 2211409
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikelnummer: 4194670
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

Udskiftningspumpe Udskiftningblad

Produkt navn Helix2.0-VE 204-1/16/E/KS/3
Artikelnummer 4250636
MEI ≥ 0,7
IE 5
Byggelængde 160 mm
Spænding 3x400 V
Pumpehusgange/-flange Rp 25 PN16
Nominel strøm 1,2 A
Nominel effekt 0,55 kW
Pumpehøjde 720 mm
Midt rør/gulv 50 mm
Medietemperatur -30 - +120 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Replacement pump equiped with cartridge mechanical seal.
Replacement pump has lower flow. Check duty point.

Produktinformation
Helix2.0-VE 204-1/16/E/KS/3

Helix2.0-VE 204-1/16/E/KS/3
Artikelnummer : 4250636
VVS-nummer :

Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.

Dine fordele
  • IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
  • Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
  • Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
  • Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit Helix 2-16
Artikelnummer: 4146788
VVS-nummer:
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_U
Artikelnummer: 4157154
VVS-nummer:
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 16BAR
Artikelnummer: 2007147
VVS-nummer:
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikelnummer: 2109467
VVS-nummer:
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVI
Artikelnummer: 2504386
VVS-nummer:

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikelnummer: 2521150
VVS-nummer:

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA
Artikelnummer: 2541618
VVS-nummer:
PRESS.SENSOR 1/4" 0-16 BAR
Artikelnummer: 2541620
VVS-nummer:
PRESS.SENSOR 1/4"0-25BAR 4-20M
Artikelnummer: 2541621
VVS-nummer:
Dryrun prot, adjustable 0,083-1,1 bar
Artikelnummer: 2835151
VVS-nummer:
Cable gland M20x1,5 CIF-Module
Artikelnummer: 2215131
VVS-nummer:
Cable gland M12 RJ45 CIF-Module Ethernet
Artikelnummer: 2215132
VVS-nummer:
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:
CIF-Modul BACnet
Artikelnummer: 2190367
VVS-nummer: 381278300

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul CAN
Artikelnummer: 2190369
VVS-nummer: 381278301

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul LON
Artikelnummer: 2190370
VVS-nummer: 381278302

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus
Artikelnummer: 2190368
VVS-nummer: 381278303

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul PLR
Artikelnummer: 2190371
VVS-nummer: 381278304

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikelnummer: 2211408
VVS-nummer: 381278310

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikelnummer: 2211409
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikelnummer: 4194670
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.