Eksisterende pumpe - Trykstigning
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Helix2.0-VE 403-1/16/E/S/3
Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.
- IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
- Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
- Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
- Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Helix2.0-VE 403-1/16/E/KS/3
Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.
- IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
- Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
- Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
- Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Helix2.0-VE 204-1/16/E/S/3
Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.
- IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
- Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
- Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
- Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Helix2.0-VE 204-1/16/E/KS/3
Høj energieffektivitet til koldtvandsanlæg i store bygninger.
Wilo-Helix2.0-VE er den nye generation af lodrette pumper med flere trin til koldtvands-anvendelser i store bygninger. Den integrerede frekvensomformer sørger i et samspil mellem reguleringsfunktioner og IE5 EC-motordrev for optimal tilpasning til de mest forskellige trykforhold og gennemstrømningsmængder. Resultatet er høj energieffektivitet i både lukkede og åbne systemer. Den gennemprøvede Helix-hydraulik i rustfrit stål sikrer desuden høj pålidelighed. Et farvedisplay med overskuelig menunavigation og den velkendte "grøn-knap-teknologi" muliggør nem ibrugtagning og betjening af pumpen. Meget nem at integrere i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler.
- IE5 EC-motorteknologi og typiske reguleringsfunktioner giver høj energieffektivitet
- Nem betjening vha. overskuelig menunavigation i farvedisplayet og grøn-knap-teknologi
- Høj pålidelighed vha. gennemprøvet pumpehydraulik i rustfrit stål
- Kan integreres i bygningsautomatiseringen via analoge og digitale grænseflader og CIF-moduler
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.