3 erstatnings løsninger fundet

Eksisterende pumpe - Cirkulation

Fabrikat Grundfos
Produkt navn UPT 100/120 PN6
Byggelængde 450 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 100 PN6

Udskiftningspumpe - Højeffektiv Premium Smart Udskiftningblad

Produkt navn Stratos GIGA2.0-I 100/1-17/2,2
Artikelnummer 2204766
MEI ≥ 0,7
IE 5
Byggelængde 450 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 100 PN16
Nominel strøm 4,0 A
Nominel effekt 2,2 kW
Medietemperatur -20 - +140 °C

Bemærkninger

Overenstemmende byggemåde og afvigende tilslutning.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Stratos GIGA2.0-I 100/1-17/2,2

Stratos GIGA2.0-I 100/1-17/2,2
Artikelnummer : 2204766
VVS-nummer :

Højeffektiv inline-pumpe med EC-motor i energiklasse IE5 iht. IEC 60034-30-2, hydraulisk mindsteeffektivitetsindeks MEI ≥ 0,7 og elektronisk ydelsestilpasning i tørløberkonstruktion. Pumpen er konstrueret som et-trins lavtrykscentrifugalpumpe med flangeforbindelse og akseltætning. Stratos GIGA2.0-I er først og fremmest designet til pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i varme-, klima- og kølesystemer.

Konstruktion
  • Et-trins lavtrykscentrifugalpumpe med udelt aksel i blokkonstruktion
  • Spiralhus i inline-konstruktion (suge- og trykstuds med samme flanger i én linje)
  • Flange PN 16 - boret iht. EN 1092-2
  • Trykmåletilslutninger (R 1/8) til monterede differenstryktransmittere (version ...-R1 uden differenstryktransmitter)
  • Pumpehus og motorflange seriemæssigt med katodisk elektroforetisk lakering
  • Akseltætning til pumpning af vand op til Tmax. = +140 °C. Op til T ≤ +40 °C er en glykol-tilsætning på 20 % til 40 % volumenandel tilladt. Ved vand-/glykol-blandinger med andele glykol > 40 % indtil maks. 50 % volumenandel og en medietemperatur på > +40 °C indtil maks. +120 °C eller andre medier afvigende fra vand skal der anvendes en alternativ akseltætning.
  • Tilslutningsspændinger: 3~440 V ±10% 50/60 Hz; 3~400 V ±10% 50/60 Hz; 3~380 V -5 % +10% 50/60 Hz
Reguleringstyper
  • Permanent, automatisk ydelsestilpasning til anlæggets behov uden angivelse af nominel værdi Wilo-Dynamic Adapt plus (fabriksindstilling).
  • Temperatur konstant (T-const.)
  • Differenstemperatur konstant (dT-const.)
  • Behovstilpasset optimeret gennemstrømningsvolumen for forsyningspumpen gennem netværksforbindelse og kommunikation med flere sekundærpumper (Multi-Flow Adaptation).
  • Konstant gennemstrømningsvolumen (Q-const.)
  • Variabelt differenstryk (dp-v) med tilvalgsmulighed for indstilling af nominelt driftspunkt Q og H
  • Konstant differenstryk (dp-c)
  • Differenstrykregulering dp-c ved et fjernere punkt i rørnettet (regulering af "værste punkt")
  • Konstant hastighed (n-const.)
  • Brugerdefineret PID-regulering
Funktioner
  • Registrering af varmemængde
  • Registrering af kølemængde
  • Indstillelig begrænsning af gennemstrømningsvolumen med Q-Limit-funktion (Qmin. og Qmax.)
  • Driftstyper dobbeltpumpe: Hoved-/reservedrift, effektivitetsoptimeret paralleldrift for dp-c og dp-v
  • Automatisk frakobling af pumpen ved nul-gennemstrømnings-registrering (No-Flow Stop)
  • Omstilling mellem varme- og kølefunktion (automatisk, eksternt eller manuelt)
  • Lagring og genopretning af de konfigurerede pumpeindstillinger (3 genopretningspunkter)
  • Visning af fejl-/advarselsmeldinger i klartekst inklusive afhjælpningsanbefaling
  • Integreret fuldt motorværn
Visning i det grafiske displays "home-screen"
  • Aktuelt indstillet reguleringstype
  • Aktuel nominel værdi
  • Aktuelt flow (kun ved tilsluttet differenstryktransmitter)
  • Aktuel medietemperatur (kun ved tilsluttet temperaturføler)
  • Aktuelt effektforbrug
  • Kumuleret strømforbrug
Version
  • 4 konfigurerbare analoge indgange: 0-10V, 2-10V, 0-20mA, 4-20mA og gængs PT1000 (kun ved to analoge indgange); spændingsforsyning med +24 V DC
  • 2 konfigurerbare digitale indgange (Ext. OFF, Ext. Min, Ext. Max, opvarmning/køling, manuel overstyring (bygningsautomatisering frakoblet), betjeningsspærre (tastelås og fjernbetjeningskonfigurationsbeskyttelse))
  • 2 konfigurerbare signalrelæer til drifts- og fejlmeldinger
  • Slot til Wilo-CIF-moduler med grænseflader til bygningsautomatisering (ekstratilbehør: CIF-moduler Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
  • Wilo Net som Wilo-systembus til indbyrdes kommunikation mellem Wilo-produkter, f.eks. Multi-Flow Adaptation; dobbeltpumpedrift og Wilo-Smart Gateway
  • Automatisk nøddrift ved særlige tilstande (definerbar pumpehastighed) f.eks. ved svigt i buskommunikationen eller af følerværdier
  • Drejeligt, grafisk farvedisplay (4,3 tommer) med betjening via en-knaps-betjeningsniveau
  • Bluetooth-grænseflade via Wilo-Smart Connect modul BT
  • Udlæsning og indstilling af driftsdata f.eks. oprettelse af en ibrugtagningsprotokol via Bluetooth-interface ved hjælp af Wilo-Assistant-appen
  • Dobbeltpumpestyring integreret (dobbeltpumper er ledningsforbundne), ved anvendelse af 2 enkeltpumper som dobbeltpumpeenhed, forbindelse via Wilo Net
  • Kabelbrudsregistrering ved analogt signal (i forbindelse med 2-10V eller 4-20mA)
  • Tidsstempel til fejl/advarsler og driftsdatahistorik
  • Permanent driftsdatahukommelse
  • Seriemæssige kondensatudløbsboringer i motorhuset (lukkede ved levering)
  • Ventilationsventil på lanternen
Leveringsomfang
  • Pumpe
  • Wilo-Smart Connect modul BT
  • Kabelforskruninger med pakningsindsatser
  • Installationsvejledning (sammendrag) og overensstemmelseserklæring
Tilbehør (skal bestilles separat)
  • 3 konsoller med fastgørelsesmateriale til opbygning af fundament
  • Blindflange til dobbeltpumpehus
  • Monteringshjælp til akseltætning (inkl. monteringsbolte)
Til forbindelse til bygningsautomatiseringen
  • CIF-modul PLR
  • CIF-modul LON
  • CIF-modul BACnet MS/TP
  • CIF-modul Modbus RTU
  • CIF-Modul CANopen
  • CIF-modul Ethernet multiprotokol (Modbus TCP, BACnet/ IP)
  • Differenstryktransmitter DDG 2-10V
  • Temperaturføler PT1000 AA
  • Følerlomme til installation af temperaturfølere i rørledningen
COUNTER FLANGE KIT DN100 PN10
Artikelnummer: 2105587
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
Drypplade 720x500 typ 2.1
Artikelnummer: 2835382
VVS-nummer:
Søjle Type 2
Artikelnummer: 2835498
VVS-nummer:
Fodplade Type 2
Artikelnummer: 2835387
VVS-nummer:
Flange gasket DN 100 PN6/10
Artikelnummer: 2153115
VVS-nummer:
Flange gasket DN 100 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 115 mm.
  • Outer diameter: 152 mm.
IR-MONITOR (D,NL,GB,F)
Artikelnummer: 2017390
VVS-nummer:
Operating and service unit for wireless remote control and remote diagnosis for all Wilo pumps with infra-red interface.
For all pumps and standard motors for measuring the direction of rotation, rotating field frequency and current operating status.
Direction of rotation checking device also for all conventional pumps with alternating or three-phase motor.
Industrial standard due to its sturdy and robust plastic casing, graphical display with scratch-resistant monitor screen.
 
One-button manual operation level for the Wilo high-efficiency and energy-saving pumps, additional 4 buttons for:
  • IR-Monitor on/off
  • Lighting on/off
  • Information/help
Display/monitor (50 x 50 mm) for displaying:
  • Electrical and hydraulic actual values
  • Power supply and duty point of the pump
  • Statistical values
  • Service information
  • Device settings.
Test functions, such as:
  • Self-test pump
  • Self-test IR-Monitor
  • Battery status check.
IF-Module BACnet
Artikelnummer: 2097811
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module CAN
Artikelnummer: 2085044
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module LON
Artikelnummer: 2022530
VVS-nummer: 381278160

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module Modbus
Artikelnummer: 2097809
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:

Udskiftningspumpe - Højeffektiv Standard Udskiftningblad

Produkt navn Yonos GIGA2.0-I 80/1-12/3,0
Artikelnummer 2205012
MEI ≥ 0,4
IE 5
Byggelængde 360 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 80 PN10
Nominel strøm 4,5 A
Nominel effekt 3,0 kW
Medietemperatur -20 - +120 °C

Bemærkninger

OBS! Ombygget af rør.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Yonos GIGA2.0-I 80/1-12/3,0

Yonos GIGA2.0-I 80/1-12/3,0
Artikelnummer : 2205012
VVS-nummer :

Analoge og digitale grænseflader byder på mulighed for integration i bygningsautomatisering.
Wilo-Yonos GIGA2.0-I er en elektronisk styret inline-tørløberpumpe, som egner sig til pumpning af store vandmængder over store løftehøjder. Takket være IE5 EC-motorteknologi og gennemprøvet pumpehydraulik (MEI ≥0,4) tilbyder den på samme tid høj energieffektivitet og høj driftssikkerhed. Den er meget nem at betjene ved hjælp af den velkendte grøn-knap-teknologi, klar menunavigation og et overskueligt farvedisplay. Analoge og digitale grænseflader byder på mulighed for integration i bygningsautomatisering.
Drypplade 380x400 typ 1.1
Artikelnummer: 2835379
VVS-nummer:
Søjle Type 1
Artikelnummer: 2835497
VVS-nummer:
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN80 PN10
Artikelnummer: 2105585
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Beslag, DN 80-bl 360
Artikelnummer: 2835405
VVS-nummer:
Flange gasket DN 80 PN6/10
Artikelnummer: 2175880
VVS-nummer:
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
IR-Stick WILO Set
Artikelnummer: 2109467
VVS-nummer:
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
IR-MONITOR (D,NL,GB,F)
Artikelnummer: 2017390
VVS-nummer:
Operating and service unit for wireless remote control and remote diagnosis for all Wilo pumps with infra-red interface.
For all pumps and standard motors for measuring the direction of rotation, rotating field frequency and current operating status.
Direction of rotation checking device also for all conventional pumps with alternating or three-phase motor.
Industrial standard due to its sturdy and robust plastic casing, graphical display with scratch-resistant monitor screen.
 
One-button manual operation level for the Wilo high-efficiency and energy-saving pumps, additional 4 buttons for:
  • IR-Monitor on/off
  • Lighting on/off
  • Information/help
Display/monitor (50 x 50 mm) for displaying:
  • Electrical and hydraulic actual values
  • Power supply and duty point of the pump
  • Statistical values
  • Service information
  • Device settings.
Test functions, such as:
  • Self-test pump
  • Self-test IR-Monitor
  • Battery status check.
IF-Module BACnet
Artikelnummer: 2097811
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module CAN
Artikelnummer: 2085044
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module LON
Artikelnummer: 2022530
VVS-nummer: 381278160

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module Modbus
Artikelnummer: 2097809
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn IPL 80/105-3/2
Artikelnummer 2121229
MEI ≥ 0,4
IE 3
Byggelængde 360 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 80 PN10
Nominel strøm 6,17 A
Nominel effekt 3 kW
Medietemperatur -20 - +120 °C

Bemærkninger

OBS! Ombygget af rør.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
IPL 80/105-3/2

IPL 80/105-3/2
Artikelnummer : 2121229
VVS-nummer :

Særlige egenskaber/produktfordele
  • Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
  • Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
  • Version serie: Motor med udelt aksel
  • Version N: Standardmotor V1 med stikaksel i rustfrit stål
  • Tovejs akseltætning (kraft-skyllet)
Konstruktion
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.

Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Tilladt temperaturområde -20 °C til +120 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter Rp 1 til DN 100
  • Maks. driftstryk 10 bar (specialversion: 16 bar) 
Materialer
  • Pumpehus og lanterne: EN-GJL-250
  • Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
  • Aksel: 1.4021
  • Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Beskrivelse/konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med: 
  • Akseltætning 
  • Flangeforbindelse med trykmålingsforbindelse R 1/8
  • Motor med udelt aksel
Drypplade 380x400 typ 1.1
Artikelnummer: 2835379
VVS-nummer:
Søjle Type 1
Artikelnummer: 2835497
VVS-nummer:
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN80 PN10
Artikelnummer: 2105585
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Fodplade type 1
Artikelnummer: 2835386
VVS-nummer:
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 80 PN6/10
Artikelnummer: 2175880
VVS-nummer:
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Switch Box KMS 3,2-16,0 A
Artikelnummer: 2835153
VVS-nummer:
SWITCH BOX SK602N
Artikelnummer: 2120444
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection).
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Terminals for external, potential-free activation/deactivation
  • Connection terminal strip
SWITCH BOX SK622N
Artikelnummer: 2120445
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection) and external run/fault signal.
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Fault signal light
  • Terminals for external, potential-free activation/deactivation
  • Potential-free contacts for external run signal (SBM) and fault signal (SSM)
  • Connection terminal strip
Scope of delivery:
  • Switchgear SK 622N
  • 4 threaded cable connections M20
  • Installation and operating instructions
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 3,0 kW 3~
Artikelnummer: 2551150
VVS-nummer: