Indlæser …
Eksisterende pumpe - Cirkulation
Udskiftningspumpe - Konventionel Udskiftningblad
Bemærkninger
Produktinformation
IPL 40/115-0,55/2
Særlige egenskaber/produktfordele
- Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
- Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
- Version serie: Motor med udelt aksel
- Version N: Standardmotor V1 med stikaksel i rustfrit stål
- Tovejs akseltætning (kraft-skyllet)
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.
Leveringsomfang
- Pumpe
- Monterings- og driftsvejledning
- Tilladt temperaturområde -20 °C til +120 °C
- Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
- Kapslingsklasse IP55
- Nominel diameter Rp 1 til DN 100
- Maks. driftstryk 10 bar (specialversion: 16 bar)
- Pumpehus og lanterne: EN-GJL-250
- Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
- Aksel: 1.4021
- Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Akseltætning
- Flangeforbindelse med trykmålingsforbindelse R 1/8
- Motor med udelt aksel
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
- Thickness: 2 mm.
- Inner diameter: 49 mm.
- Outer diameter: 85 mm.
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Terminals for external, potential-free activation/deactivation
- Connection terminal strip
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Fault signal light
- Terminals for external, potential-free activation/deactivation
- Potential-free contacts for external run signal (SBM) and fault signal (SSM)
- Connection terminal strip
- Switchgear SK 622N
- 4 threaded cable connections M20
- Installation and operating instructions
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.