2 erstatnings løsninger fundet

Eksisterende pumpe - Cirkulation Pumpekurve

Fabrikat Grundfos
Produkt navn TP 50-430/2
Byggelængde 340 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 50 PN16

Udskiftningspumpe - Højeffektiv Premium Udskiftningblad

Produkt navn Stratos GIGA 50/1-50/4,5
Artikelnummer 2170119
MEI ≥ 0,7
IE 5
Byggelængde 280 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 50 PN16
Nominel strøm 7,9 A
Nominel effekt 4,2 kW
Medietemperatur -20 - +140 °C

Udskiftnings tilbehør

Mellemstykke tilsl. DN 40 PN10 til tilsl. 65 PN6, byggl 30 mm
Artikelnummer 2835416
Antal 2
VVS-nummer 381 28 9100

Bemærkninger

Passer sammen med erstatningstilbehør uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Stratos GIGA 50/1-50/4,5

Stratos GIGA 50/1-50/4,5
Artikelnummer : 2170119
VVS-nummer :

Særlige egenskaber/produktfordele
  • Innovativ højeffektiv pumpe til største samlede virkningsgrad
  • Højeffektiv EC-motor i energiklasse IE5 i henhold til IEC 60034-30-2
  • Valgfrie grænseflader til integrering i bygningsautomatiseringen ved hjælp af indstikbare IF-moduler
Beskrivelse
Wilo-Stratos GIGA er den ideelle højeffektive pumpe til brug i varme-, klima- og køleanvendelser i bygninger, hvor der skal pumpes store vandmængder i større løftehøjder.

Konstruktion
Højeffektiv inline-pumpe med EC-motor og elektronisk ydelsestilpasning i tørløberkonstruktion. Udført som et-trins lavtrykscentrifugalpumpe med flangetilslutning og glideringstætning.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.

Udstyr/funktion
Driftstyper:
  • Δp-c for konstant differenstryk
  • Δp-v for variabelt differenstryk
  • PID-Control
  • Reguleringsdrift (n=konstant)
Manuelt betjeningsniveau
  • Grøn knap og display
Manuelle funktioner
  • Indstilling af nominel værdi for differenstryk
  • Indstilling af hastighed (manuel reguleringsdrift)
  • Indstilling af driftstype
  • Indstilling pumpe TIL/FRA
  • Konfiguration af alle driftsparametre
  • Fejlkvittering
Eksterne styringsfunktioner
  • Styreindgang "prioritet OFF"
  • Styreindgang "eksternt pumpeskift" (virker kun ved dobbeltpumpedrift)
  • Analogindgang 0 – 10 V, 0 – 20 mA til reguleringsdrift (DDC) og fjernstyring af nominel værdi
  • Analogindgang 2 – 10 V, 4 – 20 mA til reguleringsdrift (DDC) og fjernstyring af nominel værdi
  • Analogindgang 0–10 V til trykfølerens fakt. værdi-signal
  • Analogindgang 2 – 10 V, 0 – 20 mA, 4 – 20 mA til trykfølerens fakt. værdi-signal
Signal- og displayfunktioner
  • Kombinationsfejlsignal SSM
  • Samledriftsignal SBM
Dataudveksling
  • Infrarødt interface til trådløs datakommunikation med IR-monitor/IR-stick
  • Stikplads til Wilo IF-moduler (Modbus, BACnet, CAN, PLR, LON) til forbindelse til bygningsautomatiseringen
Sikringsfunktioner
  • Fuldt motorværn med integreret udløsningselektronik
  • Adgangsspærre
Dobbeltpumpestyring (2 x enkeltpumper)
  • Hoved-/reservedrift (automatisk fejlomskift)
  • Hoved-/reservedrift, pumpeskift efter 24 timer
  • Paralleldrift
  • Paralleldrift (effektivitetsoptimeret spidsbelastnings-til- og -frakobling)
Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Mindsteeffektivitetsindeks (MEI) ≥ 0,7
  • Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
  • Nettilslutning 3~480 V ±10 %, 50/60 Hz, 3~440 V ±10 %, 50/60 Hz, 3~400 V ±10 %, 50/60 Hz, 3~380 V -5 % +10 %, 50/60 Hz
  • Kapslingsklasse IP55
  • Nominel diameter DN 40 til DN 100
  • Maks. driftstryk 16 bar
Materialer
  • Pumpehus og lanterne: EN-GJL-250
  • Pumpehjul: PPS-GF40 eller EN-GJL-200 afhængigt af type
  • Aksel: 1.4122
  • Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Drypplade 380x400 typ 1.1
Artikelnummer: 2835379
VVS-nummer:
Søjle Type 1
Artikelnummer: 2835497
VVS-nummer:
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN50 PN10
Artikelnummer: 2105581
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Beslag, DN 50-bl 280
Artikelnummer: 2835401
VVS-nummer:

Flange gasket DN 50 PN6/10
Artikelnummer: 2150974
VVS-nummer:
Flange gasket DN 50 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 61 mm.
  • Outer diameter: 96 mm.
IR-MONITOR (D,NL,GB,F)
Artikelnummer: 2017390
VVS-nummer:
Operating and service unit for wireless remote control and remote diagnosis for all Wilo pumps with infra-red interface.
For all pumps and standard motors for measuring the direction of rotation, rotating field frequency and current operating status.
Direction of rotation checking device also for all conventional pumps with alternating or three-phase motor.
Industrial standard due to its sturdy and robust plastic casing, graphical display with scratch-resistant monitor screen.
 
One-button manual operation level for the Wilo high-efficiency and energy-saving pumps, additional 4 buttons for:
  • IR-Monitor on/off
  • Lighting on/off
  • Information/help
Display/monitor (50 x 50 mm) for displaying:
  • Electrical and hydraulic actual values
  • Power supply and duty point of the pump
  • Statistical values
  • Service information
  • Device settings.
Test functions, such as:
  • Self-test pump
  • Self-test IR-Monitor
  • Battery status check.
IF-Module BACnet
Artikelnummer: 2097811
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module CAN
Artikelnummer: 2085044
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module LON
Artikelnummer: 2022530
VVS-nummer: 381278160

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module Modbus
Artikelnummer: 2097809
VVS-nummer:

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
Wilo-Difftemp/anl
Artikelnummer: 2835545
VVS-nummer:
Wilo-Difftemp/dyk
Artikelnummer: 2835546
VVS-nummer:
Wilo-Temp/anl
Artikelnummer: 2835543
VVS-nummer:
Wilo-Temp/dyk
Artikelnummer: 2835544
VVS-nummer:

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn Atmos GIGA-I 40/160-5,5/2
Artikelnummer 2220084
MEI ≥ 0,4
IE 3
Byggelængde 340 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 40 PN16
Nominel strøm 9,90 A
Nominel effekt 5,5 kW
Medietemperatur -20 - +140 °C

Bemærkninger

OBS! Ombygget af rør.
For at undgå ombygning af rør kan pumpeflanger udbores med hulcirkel iht. DN50.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Atmos GIGA-I 40/160-5,5/2

Atmos GIGA-I 40/160-5,5/2
Artikelnummer : 2220084
VVS-nummer :

Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.

Tekniske data
  • Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
  • Maks. omgivelsestemperatur 40 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter DN 32 til DN 250
  • Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
Materialer
  • Pumpehus og lanterne: Standard: EN-GJL-250;
  • Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
  • Aksel: 1.4122
  • Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
  • Akseltætning
  • Flangetilslutning med trykmålingstilslutning R 1/8
  • Lanterne
  • Kobling
  • IEC-standardmotor
Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN40 PN10
Artikelnummer: 2105579
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 720x500 typ 2.1
Artikelnummer: 2835382
VVS-nummer:
Søjle Type 2
Artikelnummer: 2835498
VVS-nummer:
Fodplade Type 2
Artikelnummer: 2835387
VVS-nummer:
Trimming impeller 5,5-11 kW
Artikelnummer: 2835239
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 40 PN6/10
Artikelnummer: 2150949
VVS-nummer:
Flange gasket DN 40 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 49 mm.
  • Outer diameter: 85 mm.
Switch Box KMS 3,2-16,0 A
Artikelnummer: 2835153
VVS-nummer:
Switch box KMS 1,0-5,0 A
Artikelnummer: 2835149
VVS-nummer:
SWITCH BOX SK602N
Artikelnummer: 2120444
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection).
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Terminals for external, potential-free activation/deactivation
  • Connection terminal strip
SWITCH BOX SK622N
Artikelnummer: 2120445
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection) and external run/fault signal.
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Fault signal light
  • Terminals for external, potential-free activation/deactivation
  • Potential-free contacts for external run signal (SBM) and fault signal (SSM)
  • Connection terminal strip
Scope of delivery:
  • Switchgear SK 622N
  • 4 threaded cable connections M20
  • Installation and operating instructions
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 5,5 kW 3~
Artikelnummer: 2551154
VVS-nummer: