1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation Pumpekurve

Fabrikat Grundfos
Produkt navn TP 32-320/2
Byggelængde 340 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 32 PN16

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn IPL 32/165-3/2
Artikelnummer 2121199
MEI ≥ 0,4
IE 3
Byggelængde 320 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 32 PN10
Nominel strøm 5,80 A
Nominel effekt 3 kW
Medietemperatur -20 - +120 °C

Bemærkninger

Passer sammen med erstatningstilbehør special.
Forsynes med mellemstykke tilsl. DN 32 PN10, L = 20 mm.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
IPL 32/165-3/2

IPL 32/165-3/2
Artikelnummer : 2121199
VVS-nummer :

Særlige egenskaber/produktfordele
  • Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
  • Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
  • Version serie: Motor med udelt aksel
  • Version N: Standardmotor V1 med stikaksel i rustfrit stål
  • Tovejs akseltætning (kraft-skyllet)
Konstruktion
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.

Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Tilladt temperaturområde -20 °C til +120 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter Rp 1 til DN 100
  • Maks. driftstryk 10 bar (specialversion: 16 bar) 
Materialer
  • Pumpehus og lanterne: EN-GJL-250
  • Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
  • Aksel: 1.4021
  • Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Beskrivelse/konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med: 
  • Akseltætning 
  • Flangeforbindelse med trykmålingsforbindelse R 1/8
  • Motor med udelt aksel
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
Måltegning
Drypplade 720x500 typ 2.1
Artikelnummer: 2835382
VVS-nummer:
Måltegning
Søjle Type 2
Artikelnummer: 2835498
VVS-nummer:
Måltegning
Fodplade Type 2
Artikelnummer: 2835387
VVS-nummer:
Måltegning
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
COUNTER FLANGE KIT DN32 PN10
Artikelnummer: 2105577
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 32 PN6/10
Artikelnummer: 502616195
VVS-nummer:
Flange gasket DN 32 PN6 / 10:
  • Thickness: 1 mm.
  • Inner diameter: 43 mm.
  • Outer diameter: 82 mm.
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 3,0 kW 3~
Artikelnummer: 2551150
VVS-nummer:
EF-overensstemmelseserklæring