1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation

Fabrikat Other brands
Produkt navn PVLN 2150.82 (THRIGE)
Byggelængde 925 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 150 PN10
Nominel effekt 3 kW

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn Atmos GIGA-I 150/170-5,5/4
Artikelnummer 2219112
MEI ≥ 0,4
IE 3
Byggelængde 700 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 150 PN16
Nominel strøm 11,1 A
Nominel effekt 5,5 kW
Medietemperatur -20 - +140 °C

Bemærkninger

Replacement pump has higher motor power.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.

Produktinformation
Atmos GIGA-I 150/170-5,5/4

Atmos GIGA-I 150/170-5,5/4
Artikelnummer : 2219112
VVS-nummer :

Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.

Tekniske data
  • Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
  • Maks. omgivelsestemperatur 40 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter DN 32 til DN 250
  • Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
Materialer
  • Pumpehus og lanterne: Standard: EN-GJL-250;
  • Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
  • Aksel: 1.4122
  • Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
  • Akseltætning
  • Flangetilslutning med trykmålingstilslutning R 1/8
  • Lanterne
  • Kobling
  • IEC-standardmotor
Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Drypplade 900x600 typ 4.1
Artikelnummer: 2835384
VVS-nummer:
Måltegning
Søjle Type 4
Artikelnummer: 2835500
VVS-nummer:
Måltegning
Vibration dampers >220kg
Artikelnummer: 2835506
VVS-nummer:
Måltegning
Fodplade Type 4A
Artikelnummer: 2835389
VVS-nummer:
Måltegning
Trimming impeller 5,5-11 kW
Artikelnummer: 2835239
VVS-nummer:
CONSOLE F3-18 KIT
Artikelnummer: 2040969
VVS-nummer:
Mounting feet F 3-18:
  • Complete kit.
  • For mounting on foundations.
  • Comes in a bag.
Flange gasket DN 150 PN6/10
Artikelnummer: 2529887
VVS-nummer:
Flange gasket DN 150 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 168 mm.
  • Outer diameter: 225 mm.
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 5,5 kW 3~
Artikelnummer: 2551154
VVS-nummer:
EF-overensstemmelseserklæring