1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation

Fabrikat Salmson
Produkt navn LRN 206-16/7,5
Byggelængde 430 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 65 PN10

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn IPL 65/175-7,5/2
Artikelnummer 2121227
MEI ≥ 0,4
IE 3
Byggelængde 430 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 65 PN10
Nominel strøm 13,7 A
Nominel effekt 7,5 kW
Medietemperatur -20 - +120 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
IPL 65/175-7,5/2

IPL 65/175-7,5/2
Artikelnummer: 2121227
VVS-nummer:

Særlige egenskaber/produktfordele
  • Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
  • Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
  • Version serie: Motor med udelt aksel
  • Version N: Standardmotor V1 med stikaksel i rustfrit stål
  • Tovejs akseltætning (kraft-skyllet)
Konstruktion
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.

Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Tilladt temperaturområde -20 °C til +120 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter Rp 1 til DN 100
  • Maks. driftstryk 10 bar (specialversion: 16 bar) 
Materialer
  • Pumpehus og lanterne: EN-GJL-250
  • Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
  • Aksel: 1.4021
  • Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Beskrivelse/konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med: 
  • Akseltætning 
  • Flangeforbindelse med trykmålingsforbindelse R 1/8
  • Motor med udelt aksel
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN65 PN10
Artikelnummer: 2105583
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 580x620 typ 3.1
Artikelnummer: 2835381
VVS-nummer:
Søjle Type 3
Artikelnummer: 2835499
VVS-nummer:
Fodplade Type 3
Artikelnummer: 2835388
VVS-nummer:
Trimming impeller 5,5-11 kW
Artikelnummer: 2835239
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 65 PN6/10
Artikelnummer: 2151002
VVS-nummer:
Flange gasket DN 65 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 77 mm.
  • Outer diameter: 115 mm.
Switch Box KMS 3,2-16,0 A
Artikelnummer: 2835153
VVS-nummer:
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC-7,5 kW 3~
Artikelnummer: 2550228
VVS-nummer: