1
erstatnings løsning fundet
Eksisterende pumpe - Cirkulation
Fabrikat
Salmson
Produkt navn
LRN 204-16/4
Byggelængde
340 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 40 PN10
Udskiftningspumpe - Konventionel Udskiftningblad
Produkt navn
IPL 40/165-4/2
Artikelnummer
2121205
MEI
≥ 0,4
IE
3
Byggelængde
340 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 40 PN10
Nominel strøm
7,70 A
Nominel effekt
4 kW
Medietemperatur
-20 - +120 °C
Bemærkninger
Passer uden krav om ombygning af rørsystemet.
Produktinformation
IPL 40/165-4/2
IPL 40/165-4/2
Artikelnummer: 2121205
VVS-nummer:
Særlige egenskaber/produktfordele
- Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
- Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
- Version serie: Motor med udelt aksel
- Version N: Standardmotor V1 med stikaksel i rustfrit stål
- Tovejs akseltætning (kraft-skyllet)
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.
Leveringsomfang
- Pumpe
- Monterings- og driftsvejledning
- Tilladt temperaturområde -20 °C til +120 °C
- Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
- Kapslingsklasse IP55
- Nominel diameter Rp 1 til DN 100
- Maks. driftstryk 10 bar (specialversion: 16 bar)
- Pumpehus og lanterne: EN-GJL-250
- Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
- Aksel: 1.4021
- Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Akseltætning
- Flangeforbindelse med trykmålingsforbindelse R 1/8
- Motor med udelt aksel
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN40 PN10
Artikelnummer: 2105579
VVS-nummer:
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 720x500 typ 2.1
Artikelnummer: 2835382
VVS-nummer:
Søjle Type 2
Artikelnummer: 2835498
VVS-nummer:
Fodplade Type 2
Artikelnummer: 2835387
VVS-nummer:
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 40 PN6/10
Artikelnummer: 2150949
VVS-nummer:
- Thickness: 2 mm.
- Inner diameter: 49 mm.
- Outer diameter: 85 mm.
Switch Box KMS 3,2-16,0 A
Artikelnummer: 2835153
VVS-nummer:
Difference pressure sensor 10 m
Artikelnummer: 2136554
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 4,0 kW 3~
Artikelnummer: 2551152
VVS-nummer:
