1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation

Fabrikat Ældre Wilo
Produkt navn LRL 203-10/0,55
Byggelængde 260 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 32 PN10

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn IPL 32/95-0,55/2
Artikelnummer 2150336
MEI ≥ 0,4
IE 2
Byggelængde 260 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 32 PN10
Nominel strøm 1,34 A
Nominel effekt 0,55 kW
Medietemperatur -20 - +120 °C

Bemærkninger

Kontakt Wilos markedssupport.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
IPL 32/95-0,55/2

IPL 32/95-0,55/2
Artikelnummer : 2150336
VVS-nummer :

Særlige egenskaber/produktfordele
  • Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
  • Seriemæssige kondensatudløbsboringer i motorhusene og lanternerne
  • Version serie: Motor med udelt aksel
  • Version N: Standardmotor V1 med stikaksel i rustfrit stål
  • Tovejs akseltætning (kraft-skyllet)
Konstruktion
Tørløberpumpe i inline-konstruktion med skruet forbindelse eller flangeforbindelse.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.

Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Tilladt temperaturområde -20 °C til +120 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter Rp 1 til DN 100
  • Maks. driftstryk 10 bar (specialversion: 16 bar) 
Materialer
  • Pumpehus og lanterne: EN-GJL-250
  • Pumpehjul: PPO-glasfiberforstærket/EN-GJL-200 (afhængigt af pumpetype)
  • Aksel: 1.4021
  • Akseltætning: AQEGG, andre akseltætninger på forespørgsel
Beskrivelse/konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med: 
  • Akseltætning 
  • Flangeforbindelse med trykmålingsforbindelse R 1/8
  • Motor med udelt aksel
Drypplade 380x400 typ 1.1
Artikelnummer: 2835379
VVS-nummer:
Søjle Type 1
Artikelnummer: 2835497
VVS-nummer:
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
Fodplade type 1
Artikelnummer: 2835386
VVS-nummer:
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
COUNTER FLANGE KIT DN32 PN10
Artikelnummer: 2105577
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 32 PN6/10
Artikelnummer: 502616195
VVS-nummer:
Flange gasket DN 32 PN6 / 10:
  • Thickness: 1 mm.
  • Inner diameter: 43 mm.
  • Outer diameter: 82 mm.
Switch box KMS 1,0-5,0 A
Artikelnummer: 2835149
VVS-nummer:
SWITCH BOX SK602N
Artikelnummer: 2120444
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection).
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Terminals for external, potential-free activation/deactivation
  • Connection terminal strip
SWITCH BOX SK622N
Artikelnummer: 2120445
VVS-nummer:
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection) and external run/fault signal.
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Fault signal light
  • Terminals for external, potential-free activation/deactivation
  • Potential-free contacts for external run signal (SBM) and fault signal (SSM)
  • Connection terminal strip
Scope of delivery:
  • Switchgear SK 622N
  • 4 threaded cable connections M20
  • Installation and operating instructions
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC-0,55 kW 3~
Artikelnummer: 2550225
VVS-nummer: