Eksisterende pumpe - Cirkulation Pumpekurve
Udskiftningspumpe - Højeffektiv Standard Udskiftningblad
Bemærkninger
Produktinformation
Yonos GIGA2.0-I 125/1-17/7,5
Effektiv pumpning af store vandmængder til varme-, klima- og køleanlæg i store bygninger.
Wilo-Yonos GIGA2.0-I er en elektronisk styret inline-tørløberpumpe, som egner sig til pumpning af store vandmængder over store løftehøjder. Med gennemprøvet pumpehydraulik (MEI ≥ 0,4) og avanceret motorteknologi tilbyder den IE5- og IE4-motorer, der leverer tilsvarende høj energieffektivitet og pålidelighed, afhængigt af pumpetypen. Den er meget nem at betjene ved hjælp af den velkendte grøn-knap-teknologi, klar menunavigation og et overskueligt farvedisplay. Analoge og digitale grænseflader byder på mulighed for integration i bygningsautomatisering.
- Thickness: 2 mm.
- Inner diameter: 142 mm.
- Outer diameter: 195 mm.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Udskiftningspumpe - Konventionel Udskiftningblad
Bemærkninger
Produktinformation
Atmos GIGA-I 125/220-5,5/4
Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.
Tekniske data
- Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
- Maks. omgivelsestemperatur 40 °C
- Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
- Kapslingsklasse IP55
- Nominel diameter DN 32 til DN 250
- Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
- Pumpehus og lanterne: Standard: EN-GJL-250;
- Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
- Aksel: 1.4122
- Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Akseltætning
- Flangetilslutning med trykmålingstilslutning R 1/8
- Lanterne
- Kobling
- IEC-standardmotor
- Pumpe
- Monterings- og driftsvejledning
- Complete kit.
- For mounting on foundations.
- Comes in a bag.
- Thickness: 2 mm.
- Inner diameter: 142 mm.
- Outer diameter: 195 mm.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.