2
erstatnings løsninger fundet
Eksisterende pumpe - Cirkulation
Fabrikat
Ældre Wilo
Produkt navn
IL 150/270-22/4
Artikelnummer
2088439-2120816
Byggelængde
700 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 150 PN16
Nominel effekt
22 kW
Udskiftningspumpe - Elektronisk Udskiftningblad
Produkt navn
IL-E 150/250-22/4
Artikelnummer
2221310
MEI
≥ 0,4
IE
4
Byggelængde
700 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 150 PN16
Nominel strøm
38,4 A
Nominel effekt
22 kW
Medietemperatur
-20 - +140 °C
Bemærkninger
Passer uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.
Produktinformation
IL-E 150/250-22/4
IL-E 150/250-22/4
Artikelnummer
: 2221310
VVS-nummer
:
Særlige egenskaber/produktfordele
- Energibesparelse på grund af integreret elektronisk ydelsestilpasning
- Ekstra interfaces til buskommunikation ved hjælp af indstikbare IF-moduler
- Enkel betjening ved hjælp af grøn-knap-teknologi og display
- Integreret dobbeltpumpestyring
- Integreret fuldt motorværn (koldlederføler) med udløsningselektronik
Elektronisk styret tørløberenkeltpumpe i inline-konstruktion med flangetilslutning og automatisk ydelsestilpasning.
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.
Udstyr/funktion
Driftstyper:
- Δp-c for konstant differenstryk
- Δp-v for variabelt differenstryk
- PID-kontrol
- Reguleringsdrift (n=konstant)
- Grøn knap og display
- Indstilling af nominel værdi for differenstryk
- Indstilling af hastighed (manuel reguleringsdrift)
- Indstilling af driftstype
- Indstilling pumpe TIL/FRA
- Konfiguration af alle driftsparametre
- Fejlkvittering
- Styreindgang "prioritet OFF"
- Styreindgang "eksternt pumpeskift" (virker kun ved dobbeltpumpedrift)
- Analogindgang 0 – 10 V, 0 – 20 mA til reguleringsdrift (DDC) og fjernstyring af nominel værdi
- Analogindgang 2 – 10 V, 4 – 20 mA til reguleringsdrift (DDC) og fjernstyring af nominel værdi
- Analogindgang 0–10 V til trykfølerens fakt. værdi-signal
- Analogindgang 2 – 10 V, 0 – 20 mA, 4 – 20 mA til trykfølerens fakt. værdi-signal
- Kombinationsfejlsignal SSM
- Samledriftsignal SBM
- Infrarødt interface til trådløs datakommunikation med IR-monitor/IR-stick
- Stikplads til Wilo IF-moduler (Modbus, BACnet, CAN, PLR, LON) til forbindelse til bygningsautomatiseringen
- Fuldt motorværn med integreret udløsningselektronik
- Adgangsspærre
- Hoved-/reservedrift (automatisk fejlomskift)
- Hoved-/reservedrift, pumpeskift efter 24 timer
- Paralleldrift
- Paralleldrift (effektivitetsoptimeret spidsbelastnings-til- og -frakobling)
- Pumpe
- Monterings- og driftsvejledning
- Tilladt temperaturområde -20 °C til +140 °C
- Nettilslutning
- 3~440 V ±10 %, 50/60 Hz
- 3~400 V ±10 %, 50/60 Hz
- 3~380 V -5 % +10 %, 50/60 Hz
- Kapslingsklasse IP 55
- Nominel diameter DN 40 til DN 200
- Maks. driftstryk 16 bar
- Pumpehus og lanterne: EN-GJL-250
- Pumpehjul
- Standardudførelse: EN-GJL-200
- Specialudførelse: Bronze CuSn 10
- Aksel: 1.4122
- Glideringstætning: AQEGG, andre glideringstætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Glideringstætning
- flangetilslutning
- Lanterne
- Kobling
- Drev med integreret elektronisk hastighedsregulering
CONSOLE F3-18 KIT
Artikelnummer: 2040969
VVS-nummer:
- Complete kit.
- For mounting on foundations.
- Comes in a bag.
Flange gasket DN 150 PN6/10
Artikelnummer: 2529887
VVS-nummer:
- Thickness: 2 mm.
- Inner diameter: 168 mm.
- Outer diameter: 225 mm.
Udskiftningspumpe - Konventionel Udskiftningblad
Produkt navn
Atmos GIGA-I 150/250-22/4
Artikelnummer
2218504
MEI
≥ 0,4
IE
3
Byggelængde
700 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 150 PN16
Nominel strøm
40,2 A
Nominel effekt
22 kW
Medietemperatur
-20 - +140 °C
Bemærkninger
Passer uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.
Produktinformation
Atmos GIGA-I 150/250-22/4
Atmos GIGA-I 150/250-22/4
Artikelnummer
: 2218504
VVS-nummer
:
Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.
Tekniske data
- Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
- Maks. omgivelsestemperatur 40 °C
- Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
- Kapslingsklasse IP55
- Nominel diameter DN 32 til DN 250
- Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
- Pumpehus og lanterne: Standard: EN-GJL-250;
- Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
- Aksel: 1.4122
- Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Akseltætning
- Flangetilslutning med trykmålingstilslutning R 1/8
- Lanterne
- Kobling
- IEC-standardmotor
- Pumpe
- Monterings- og driftsvejledning
CONSOLE F3-18 KIT
Artikelnummer: 2040969
VVS-nummer:
- Complete kit.
- For mounting on foundations.
- Comes in a bag.
Flange gasket DN 150 PN6/10
Artikelnummer: 2529887
VVS-nummer:
- Thickness: 2 mm.
- Inner diameter: 168 mm.
- Outer diameter: 225 mm.
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC-22 kW 3~
Artikelnummer: 2550231
VVS-nummer:
