Eksisterende pumpe - Cirkulation

Udskiftningspumpe - Højeffektiv Premium Smart Udskiftningblad
Bemærkninger
Produktinformation
Stratos GIGA2.0-I 100/1-14/5,5

Den smarte tørløberpumpe til varme-, klima- og køleanvendelse i store bygninger.
Den højeffektive Wilo-Stratos GIGA2.0-D er altid hensigtsmæssig at bruge, når der skal flyttes store vandmængder over store løftehøjder. Den smarte tørløberpumpe i inline-version byder på mange grænseflader til multipumpestyring, integration i bygningsautomatisering, driftsdataregistrering og tidssvarende muligheder for mobil tilgang via Wilo-Smart Connect. Grøn-knap-teknologi og det store display giver mulighed for enkel og intuitiv betjening. Brugen af indstillingsassistenten sikrer optimal regulering. Den optimale energieffektivitet for hele systemet skyldes det intelligente samspil mellem IE5 EC-motorteknologi med gennemprøvet pumpehydraulik (MEI ≥0,7) og innovative reguleringsfunktioner. Den nye drivteknologi sammen med gennemprøvet pumpehydraulik giver stor driftssikkerhed.

Udskiftningspumpe - Konventionel Udskiftningblad
Bemærkninger
Produktinformation
Atmos GIGA-I 100/190-5,5/4

Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e
Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.
Tekniske data
- Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
- Maks. omgivelsestemperatur 40 °C
- Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
- Kapslingsklasse IP55
- Nominel diameter DN 32 til DN 250
- Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
- Pumpehus og lanterne: Standard: EN-GJL-250;
- Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
- Aksel: 1.4122
- Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
- Akseltætning
- Flangetilslutning med trykmålingstilslutning R 1/8
- Lanterne
- Kobling
- IEC-standardmotor
- Pumpe
- Monterings- og driftsvejledning

- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.







- Thickness: 2 mm.
- Inner diameter: 115 mm.
- Outer diameter: 152 mm.


Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Terminals for external, potential-free activation/deactivation
- Connection terminal strip

Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Fault signal light
- Terminals for external, potential-free activation/deactivation
- Potential-free contacts for external run signal (SBM) and fault signal (SSM)
- Connection terminal strip
- Switchgear SK 622N
- 4 threaded cable connections M20
- Installation and operating instructions

The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.



