1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation

Fabrikat KSB
Produkt navn EtaLine 040-040-250 ø233 2900 rpm
Byggelængde 440 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 40 PN16
Nominel effekt 15 kW

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn Atmos GIGA-I 40/210-11/2
Artikelnummer 2222630
MEI ≥ 0,4
IE 3
Byggelængde 390 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 40 PN16
Nominel strøm 21,5 A
Nominel effekt 11 kW
Medietemperatur -20 - +140 °C

Udskiftnings tilbehør

Mellemstykke tilsl. DN 32 PN10 til tilsl. 50 PN16, byggl 50 mm
Artikelnummer 2835413
Antal 1
VVS-nummer 381 28 8050

Bemærkninger

Passer sammen med erstatningstilbehør uden krav om ombygning af rørsystemet.
Erstatningspumpe har lavere tryk ved lavt flow. Kontrollér driftspunkt.
Replacement pump has less motor power.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Atmos GIGA-I 40/210-11/2

Atmos GIGA-I 40/210-11/2
Artikelnummer : 2222630
VVS-nummer :

Konstruktion
Tørløberpumpe i inline-konstruktion med flangeforbindels.e

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende substanser i varmtvands-, koldtvands- og kølesystemer.

Tekniske data
  • Tilladt temperaturområde for pumpemediet -20 °C til +140 °C
  • Maks. omgivelsestemperatur 40 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP55
  • Nominel diameter DN 32 til DN 250
  • Standardversion til driftstryk: 13 bar (til +140 °C)/16 bar (til +120 °C)
Materialer
  • Pumpehus og lanterne: Standard: EN-GJL-250;
  • Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10 rustfrit stål 1.4408
  • Aksel: 1.4122
  • Akseltætning: AQEGG, andre glideringstætninger på forespørgsel
Konstruktion
Et-trins lavtrykscentrifugalpumpe i inline-konstruktion med:
  • Akseltætning
  • Flangetilslutning med trykmålingstilslutning R 1/8
  • Lanterne
  • Kobling
  • IEC-standardmotor
Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
Måltegning
COUNTER FLANGE KIT DN40 PN10
Artikelnummer: 2105579
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 720x500 typ 2.1
Artikelnummer: 2835382
VVS-nummer:
Måltegning
Søjle Type 2
Artikelnummer: 2835498
VVS-nummer:
Måltegning
Fodplade Type 2
Artikelnummer: 2835387
VVS-nummer:
Måltegning
Trimming impeller 5,5-11 kW
Artikelnummer: 2835239
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 40 PN6/10
Artikelnummer: 2150949
VVS-nummer:
Flange gasket DN 40 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 49 mm.
  • Outer diameter: 85 mm.
Switch Box KMS 3,2-16,0 A
Artikelnummer: 2835153
VVS-nummer:
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC-11 kW 3~
Artikelnummer: 2550229
VVS-nummer:
EF-overensstemmelseserklæring