1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation

Fabrikat Ældre Wilo
Produkt navn DL 80/270-5,5/4
Artikelnummer 2120968
Byggelængde 500 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 80 PN16
Nominel effekt 5,5 kW

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn Atmos GIGA-D 80/240-5,5/4
Artikelnummer 2225460
MEI ≥ 0,4
IE 3
Byggelængde 500 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 80 PN16
Nominel strøm 11,1 A
Nominel effekt 5,5 kW
Medietemperatur -20 - +140 °C

Bemærkninger

Passer uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
Atmos GIGA-D 80/240-5,5/4

Atmos GIGA-D 80/240-5,5/4
Artikelnummer : 2225460
VVS-nummer :

Den universelle tørløberpumpe til varme-, klima- og køleanvendelser i store bygninger.
Wilo-Atmos GIGA-D tilbyder en bred vifte af komponenter og materialer til forskellige anvendelsesmuligheder. Den kan transportere forskellige pumpemedier med temperaturer fra -20 °C til +140 °C og er derfor særdeles velegnet til klima- og køleapplikationer. Eventuelt dannet kondensat kan målrettet bortledes via et afløb. Pumpen, der er udstyret med den nyeste pumpehydraulik og IE3-motorer, er lige så driftssikker, som den er energibesparende. De støbte komponenter med korrisionsbestandig katodisk elektroforetisk lakering sikrer også en lang levetid.

Dine fordele
  • Avanceret pumpehydraulik og IE3-motorteknologi er garant for sikker og energibesparende drift
  • Lang levetid takket være korrosionsbestandig katodisk elektroforetisk lakering af alle støbte komponenter
  • Målrettet bortledning af kondensat ved anvendelse af klima- og køleanlæg
  • Enkel installation med mulighed for fastgørelse af pumpefødderne for maksimal stabilitet
  • Kan anvendes til hoved-/reservedrift eller spidsbelastningsdrift (med eksternt ekstraapparat)
COUNTER FLANGE KIT DN80 PN10
Artikelnummer: 2105585
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 900x600 typ 4.1
Artikelnummer: 2835384
VVS-nummer:
Søjle Type 4
Artikelnummer: 2835500
VVS-nummer:
Vibration dampers >220kg
Artikelnummer: 2835506
VVS-nummer:
Fodplade Type 4B
Artikelnummer: 2835390
VVS-nummer:
BLIND-FLANGE P228 KIT
Artikelnummer: 2040971
VVS-nummer:
Blinds for service and repair work.
  • Comes in a complete kit containing a lid and gasket.
Trimming impeller 5,5-11 kW
Artikelnummer: 2835239
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 80 PN6/10
Artikelnummer: 2175880
VVS-nummer:
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC 5,5 kW 3~
Artikelnummer: 2551154
VVS-nummer: