1
erstatnings løsning fundet
Eksisterende pumpe - Cirkulation
Fabrikat
Ældre Wilo
Produkt navn
DL 32/150-0,37/4
Artikelnummer
2089226
Byggelængde
320 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 32 PN16
Nominel effekt
0,37 kW
Udskiftningspumpe - Konventionel Udskiftningblad
Produkt navn
Atmos GIGA-D 32/150-0,37/4
Artikelnummer
2225262
MEI
≥ 0,4
IE
3
Byggelængde
320 mm
Spænding
3x400 V
Pumpehusgange/-flange
DN 32 PN16
Nominel strøm
0,84 A
Nominel effekt
0,37 kW
Medietemperatur
-20 - +140 °C
Bemærkninger
Passer uden krav om ombygning af rørsystemet.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.
Produktinformation
Atmos GIGA-D 32/150-0,37/4
Atmos GIGA-D 32/150-0,37/4
Artikelnummer
: 2225262
VVS-nummer
:
Den universelle tørløberpumpe til varme-, klima- og køleanvendelser i store bygninger.
Wilo-Atmos GIGA-D tilbyder en bred vifte af komponenter og materialer til forskellige anvendelsesmuligheder. Den kan transportere forskellige pumpemedier med temperaturer fra -20 °C til +140 °C og er derfor særdeles velegnet til klima- og køleapplikationer. Eventuelt dannet kondensat kan målrettet bortledes via et afløb. Pumpen, der er udstyret med den nyeste pumpehydraulik og IE3-motorer, er lige så driftssikker, som den er energibesparende. De støbte komponenter med korrisionsbestandig katodisk elektroforetisk lakering sikrer også en lang levetid.
Dine fordele
- Avanceret pumpehydraulik og IE3-motorteknologi er garant for sikker og energibesparende drift
- Lang levetid takket være korrosionsbestandig katodisk elektroforetisk lakering af alle støbte komponenter
- Målrettet bortledning af kondensat ved anvendelse af klima- og køleanlæg
- Enkel installation med mulighed for fastgørelse af pumpefødderne for maksimal stabilitet
- Kan anvendes til hoved-/reservedrift eller spidsbelastningsdrift (med eksternt ekstraapparat)
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
Drypplade 580x620 typ 3.1
Artikelnummer: 2835381
VVS-nummer:
Søjle Type 3
Artikelnummer: 2835499
VVS-nummer:
Fodplade Type 3A
Artikelnummer: 2835388
VVS-nummer:
BLIND-FLANGE P228 KIT
Artikelnummer: 2040971
VVS-nummer:
- Comes in a complete kit containing a lid and gasket.
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
COUNTER FLANGE KIT DN32 PN10
Artikelnummer: 2105577
VVS-nummer:
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 32 PN6/10
Artikelnummer: 502616195
VVS-nummer:
- Thickness: 1 mm.
- Inner diameter: 43 mm.
- Outer diameter: 82 mm.
Frekvensomformer EFC-0,37 kW 3~
Artikelnummer: 2550224
VVS-nummer:
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
