1 erstatnings løsning fundet

Eksisterende pumpe - Cirkulation Pumpekurve

Fabrikat Perfecta
Produkt navn C2 80-12
Byggelængde 500 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 80 PN10

Udskiftningspumpe - Konventionel Udskiftningblad

Produkt navn DL 65/170-1,5/4
Artikelnummer 2120956
MEI ≥ 0,4
IE 3
Byggelængde 430 mm
Spænding 3x400 V
Pumpehusgange/-flange DN 65 PN16
Nominel strøm 3,40 A
Nominel effekt 1,5 kW
Medietemperatur -20 - +140 °C

Bemærkninger

Passer sammen med erstatningstilbehør special.
Pumpeflange udbores iht. tilslutning DN 80 trykklasse PN10. Flangemål 70 mm.
Kontakt Wilo-Teknisk indesalg ved pumpning med glycol eller har speciel materiale krav.

Produktinformation
DL 65/170-1,5/4

DL 65/170-1,5/4
Artikelnummer : 2120956
VVS-nummer :

Særlige egenskaber/produktfordele
  • Reducerede Life Cycle Costs på grund af optimeret virkningsgrad
  • Kan anvendes fleksibelt i klima- og køleanlæg med anvendelsesfordele på grund af målrettet kondensatbortledning ved hjælp af optimeret design af lanternen (patenteret)
  • Høj korrosionsbeskyttelse på grund af katodisk elektroforetisk lakering
  • Hoved-/reservedrift eller spidsbelastningsdrift (ved hjælp af eksternt ekstraapparat)
Konstruktion
Tørløberdobbeltpumpe i inline-konstruktion med flangetilslutning.

Anvendelse
Pumpning af opvarmningsvand (iht. VDI 2035), koldt vand og vand-glykol-blandinger uden slibende partikler i opvarmnings-, koldtvands- og kølesystemer.

Leveringsomfang
  • Pumpe
  • Monterings- og driftsvejledning
Tekniske data
  • Tilladt temperaturområde -20 °C til +140 °C
  • Nettilslutning 3~400 V, 50 Hz (andre på forespørgsel)
  • Kapslingsklasse IP 55
  • Nominel diameter DN 32 til DN 200
  • Maks. driftstryk 16 bar
Materialer
  • Pumpehus og lanterne: Standard: EN-GJL-250
  • Pumpehjul: Standard: EN-GJL-200; specialudførelse: Bronze CuSn 10
  • Aksel: 1.4122
  • Glideringstætning: AQEGG, andre glideringstætninger på forespørgsel
Beskrivelse/konstruktion
Et-trins lavtryksdobbeltpumpe med i inline-konstruktion med: 
  • Omskifterventil
  • Glideringstætning 
  • Flangetilslutning med trykmålingstilslutning R 1/8
  • Lanterne
  • Kobling 
  • IEC-normmotor
Vibrationsdæmpere
Artikelnummer: 2835505
VVS-nummer:
COUNTER FLANGE KIT DN65 PN10
Artikelnummer: 2105583
VVS-nummer:
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Drypplade 900x600 typ 4.1
Artikelnummer: 2835384
VVS-nummer:
Søjle Type 4
Artikelnummer: 2835500
VVS-nummer:
Fodplade Type 4A
Artikelnummer: 2835389
VVS-nummer:
BLIND-FLANGE P228 KIT
Artikelnummer: 2040971
VVS-nummer:
Blinds for service and repair work.
  • Comes in a complete kit containing a lid and gasket.
Trimming impeller up to and incl. 4 kW
Artikelnummer: 2835488
VVS-nummer:
Drilling flange up to DN100
Artikelnummer: 2835368
VVS-nummer:
Flange gasket DN 65 PN6/10
Artikelnummer: 2151002
VVS-nummer:
Flange gasket DN 65 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 77 mm.
  • Outer diameter: 115 mm.
Difference pressure sensor 10 m
Artikelnummer: 2136454
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikelnummer: 2136456
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikelnummer: 2136458
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikelnummer: 503184696
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikelnummer: 503184799
VVS-nummer:

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvensomformer EFC-1,5 kW 3~
Artikelnummer: 2550226
VVS-nummer: