Eksisterende pumpe - Afløp
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
TSW 32/11 A
Your advantages
- User-friendly – lightweight, ready-to-plug version (Plug&Pump)
- Perfect for mobile applications – features a robust, impact-resistant stainless steel housing
- Reliable operation – stainless steel-encapsulated motor with sheath flow cooling, mechanical seal and sealing chamber
Submersible drainage pump
Application
Pumping of:
- Sewage without faeces or long-fibre constituents
- Wastewater
- Connection cable with plug
- Float switch
- Self-switching thermal motor monitoring
- Sheath current cooling
- Pump with connection cable and plug
- Attached float switch
- Non-return valve, supplied
- Hose connection, enclosed
- Installation and operating instructions
- Mains connection 1~ 230 V, 50 Hz
- Protection class: IP68
- Max. immersion depth: 7 m
- Fluid temperature: 3 ... 35 °C, briefly up to 3 min.: max. 90 °C
- Pressure port: Rp 1¼
- Motor housing: 1.4301 (AISI 304)
- Pump housing: 1.4301 (AISI 304)
- Impeller: SPL
- Shaft: 1.4401 (AISI 316)
- Seal:
- On motor side: NBR
- Fluid side: Carbon/ceramic
Submersible pump for stationary and portable wet-well installation in fully automatic mode with attached float switch.
Hydraulics
The pumps are equipped with an open multi-channel impeller and have a 10 mm free ball passage. The pressure connection is a vertical threaded connection.
Motor
Single-phase AC motor with integrated operating capacitor. The motor heat is transferred directly to the fluid via the motor housing.
The motor is equipped with automatically switching thermal motor monitoring. This means that the motor is switched off if it overheats and is automatically switched on again once it has cooled down.
Seal
The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.
Cable
The pump is equipped with a 10 m connection cable with a shockproof plug and an attached float switch.
Versions
- Drain TSW with twister function – The twister function guarantees constant turbulence in the pump's suction area. This prevents sediment from settling, This results in a clean pump sump and reduces the build-up of odours
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Padus MINI3-V04.08/T05-540/O
Den kompakte dykpumpe Wilo-Padus MINI3 er ideel i vådinstallation til vandafledning i en- og tofamiliehuse og grunde. Den transporterer sikkert snavset vand som fækaliefrit spildevand iht. DIN EN 12050-2 og kan anvendes stationært i pumpeskakter eller mobilt og fleksibelt. En optimeret hydraulik bestående af kompositmaterialer giver mulighed for anvendelse i vidt forskellige pumpemedier. Der kan vælges mellem to hydraulikvarianter, en multichannel-variant med høj virkningsgrad og en Vortex-variant med stor fri gennemgangsdiameter.
Takket være kompaktheden er installationen særligt enkel og også mulig i snævre vandafledningsudgravninger. Konstruktionen giver mulighed for større vedligeholdelsesintervaller. Vedligeholdelsesarbejde kan desuden udføres meget komfortabelt ved hjælp af den direkte tilgang til de vigtigste komponenter.
- Intended for pumps in the Rexa series.
- Connection G 40.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Switching points: up ON / down OFF