1 erstatnings løsning fundet

Eksisterende pumpe - Afløp

Fabrikat Ældre Wilo
Produkt navn TS 50 H 111/11 1-fas
Artikelnummer 4025037
VVS-nummer 392292211
Spænding 1x230 V
Pumpehusgange/-flange G 50 inv.
Nominel effekt 1,1 kW

Udskiftningspumpe Udskiftningblad

Produkt navn Padus UNI M05/M11-523/P
Artikelnummer 6084801
Spænding 1x230 V
Pumpehusgange/-flange Rp 50
Nominel strøm 6,9 A
Nominel effekt 1,1 kW
Medietemperatur +3 - +40 °C
Frit gennemløb 10

Bemærkninger

Eventuel justering af installationen, erstatningspumpe er i overensstemmelse med tilslutningsdimension.
Erstatningspumpe har højere kapacitet.

Produktinformation
Padus UNI M05/M11-523/P

Padus UNI M05/M11-523/P
Artikelnummer : 6084801
VVS-nummer :

Your advantages
  • Exceptional reliability owing to corrosion-free hydraulics for universal applications and various fluids
  • Easy installation thanks to its low weight, integrated capacitor at the AC motor and threaded flange
  • Optimum efficiency and high operational reliability owing to improved hydraulics
  • Quick maintenance facilitated by direct access to the sealing chamber and pump housing
  • Long maintenance intervals thanks to double mechanical seal and large volume sealing chamber
  • Clog-proof thanks to the integrated strainer
The flexible drainage pump for a diverse range of fluids.
The Wilo-Padus UNI is the ideal entry-level model for wastewater transport in small commercial buildings. The pump can be used flexibly as a portable device or in a pump chamber. Hydraulics made from corrosion-free composite material provide high levels of reliability for universal use in the pumping of a diverse range of fluids. Installation is made very simple due to its low weight, integrated capacitor and threaded connection. A double mechanical seal and the large sealing chamber facilitate long maintenance intervals. Direct access to the most important components make maintenance work very convenient. By utilising Wilo-Control switchgears, the Wilo-Padus UNI can also be integrated into existing building management systems.

Construction
Submersible drainage pump for intermittent operation for portable wet well installation.

Application
Pumping of:
  • Sewage not containing faeces (EN 12050-2)
  • Wastewater
  • Fluids with a pH value of > 4.5
  • Material version "B": Aggressive fluids, e.g. lake/sea water, condensate, distilled water
Equipment/function
  • Winding temperature monitoring with bimetallic strip
  • Ready-to-plug (versions A and P)
  • Float switch (version A)
  • Vertical float switch (version VA)
Scope of delivery
  • Submersible drainage pump with 10 m cable
  • Operating and maintenance manual
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10%, S1 (Version "C")
  • Pressure connection: G2
  • Protection class: IP68
  • Insulation class: F
  • Fluid temperature: 3 – 40 °C, max. 60 °C for 3 min
  • Free passage: 10 mm
  • Cable length: 10 m
Materials
  • Motor housing: 1.4301
  • Hydraulics housing: PP-GF30 (copolymer)
  • Impeller: PP-GF30 (copolymer)
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/Cr
  • Shaft end: Stainless steel 1.4401
In material version "B", all parts that come in contact with the fluid are made of stainless steel 1.4401 (AISI 316).

Description/construction
Submersible drainage pump as submersible monobloc unit for portable wet well installation.

Hydraulics
The outlets on the pressure side are designed as vertical threaded flange connections. Open multi-channel impellers are used as the impeller shape. A strainer is integrated at the hydraulics housing.

Motor
The available motors are surface-cooled motors or self-cooling motors in single-phase current version (with built-in operating capacitor) and three-phase current version for direct starting.

With the surface-cooled motors, the waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent periodic duty (S3).

With the self-cooling motors, the waste heat is given off to the fluid via the sheath flow cooling. The motors can be used in immersed state and in non-immersed state for continuous duty (S1).

Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.

The connection cable has a length of 10 m as standard and is available in following versions:
  • With bare cable ends
  • With plug
  • With float switch and plug
Pump with vertical float switch
The "VA" version is equipped with a vertical float switch. In this version, the switching level is preset by two floaters sitting on a threaded rod. It uses less space than conventional float switches and is perfect for use in tight manholes.

Seal
There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The unit is sealed on the fluid and on the motor side by mechanical seals.
Wilo-Control MS-Lift 1x4
Artikelnummer: 2539741
VVS-nummer:

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikelnummer: 2539745
VVS-nummer:

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikelnummer: 2543210
VVS-nummer:

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikelnummer: 2543220
VVS-nummer:

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DrainAlarm2
Artikelnummer: 2545133
VVS-nummer:

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikelnummer: 2519924
VVS-nummer:

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CAB
Artikelnummer: 2519921
VVS-nummer:

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikelnummer: 503211390
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikelnummer: 503211893
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikelnummer: 2004593
VVS-nummer:

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Weight for float switch (WA 65)
Artikelnummer: 2835532
VVS-nummer:
Float switch WA KR1 S
Artikelnummer: 6082807
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Drain Alarm complete
Artikelnummer: 2835768
VVS-nummer: