1 erstatnings løsning fundet

Eksisterende pumpe - Afløp

Fabrikat Ældre Wilo
Produkt navn FA 08.52-200W T17-4/8
Spænding 3x400 V
Pumpehusgange/-flange DN 80

Udskiftningspumpe Udskiftningblad

Produkt navn Rexa PRO V06-628
Artikelnummer 6064742
Spænding 3x400 V
Pumpehusgange/-flange DN 65/80
Nominel strøm 6,0 A
Nominel effekt 2,5 kW
Medietemperatur +3 - +40 °C
Frit gennemløb 65

Bemærkninger

Eventuel justering af installationen, erstatningspumpe er i overensstemmelse med tilslutningsdimension.

Produktinformation
Rexa PRO V06-628

Rexa PRO V06-628
Artikelnummer : 6064742
VVS-nummer :

Your advantages
  • Highly efficient thanks to efficiency-optimised, single-channel impellers
  • Reliable operation due to clogging-free vortex impellers.
  • Tested safety. Ex-rated in accordance with ATEX as standard
  • Energy-efficient IE3 motor technology available as an option
Construction
Submersible sewage pump for continuous duty for stationary and portable wet well installation, as well as for stationary dry well installation.

Application
Pumping of:
  • Untreated sewage
  • Sewage containing faeces
  • Wastewater
Equipment/function
  • Leakage detection for the motor compartment
  • Winding temperature monitoring with bimetallic strip
  • Optional external pencil electrode for sealing chamber control
  • Single-phase version with capacitor switchgear
Scope of delivery
  • Submersible sewage pump with 10 m cable
  • Operating and maintenance manual
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-30 min; S3 25%
  • Protection class: IP68
  • Insulation class: F, optionally H
  • Fluid temperature: 3…40 °C, max. 60 °C for 3 min
  • Max. immersion depth: 20 m
  • Cable length: 10 m
Materials
  • Motor housing: EN-GJL-250
  • Hydraulics housing: EN-GJL 250
  • Impeller: EN-GJL 250 or EN-GJS-500-7
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/MgSiO4
  • Shaft end: Stainless steel 1.4021
Description/construction
Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation, as well as stationary dry well installation.

Hydraulics
 The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 % (depending on the hydraulics). Vortex and single-channel impellers are used.

Motor
 The motor versions used are single-phase current and three-phase current surface-cooled motors. For single-phase current motors, the condenser is installed in a separate switchgear. Depending on performance, activation is carried out via direct startup or star/delta startup.
The motor is cooled by the medium around it (pumped fluid or air). The waste heat is dissipated via the motor housing.

The motors can be immersed during continuous duty (S1). In submerged operation, the operating modes S1 (continuous duty), S2 (short-time duty) or S3 (intermittent) are possible depending on the rated motor power.

Furthermore the motors are equipped with the following monitoring devices:
  • Leakage detection motor compartment: The leakage detection signals water ingress into the motor compartment.
  • Thermal motor monitoring: thermal motor monitoring protects the motor winding against overheating. Bimetallic strips are used for this as standard.
The motor can also be fitted with an external sealing chamber electrode to monitor the sealing chamber. This signals if there is water ingress into the sealing chamber through the mechanical seal on the fluid side.

The connection cable has bare cable ends and a length of 10 m as standard.

Seal
 Located between the motor and hydraulics is a sealing chamber with the seal on the fluid and motor side. This sealing chamber is filled with medicinal white oil. The fluid-side and motor-side seals are provided by two mechanical seals which rotate independently of each other.
MATING FLANGE DN65-2"1/2-STZN
Artikelnummer: 4015204
VVS-nummer:
Counterflange:
  • Made of cast iron.
  • Comes complete with flange, bolts and nuts, as well as gaskets.
chainkit PCS 400KG 1.4401 5M C
Artikelnummer: 6063136
VVS-nummer:
Chain:
  • Maximum pump weight 400kg.
  • Made of acid-resistant steel (1.4401).
  • Length 5 meters.
suspension device DN80/2RK SB
Artikelnummer: 6082333
VVS-nummer:
Coupling:
  • Intended for pumps in the Rexa series.
  • Connection DN 80/65.
QUADRANT-PIPE-DN65
Artikelnummer: 4015212
VVS-nummer:
Elbow:
  • Intended for pumps in the Rexa series.
  • 90 degrees.
RIBBED-BUSH-DN65-STAINLESS-STE
Artikelnummer: 4015210
VVS-nummer:
Hose fitting:
  • Intended for submersible pumps. Includes hose clamp.
NON-RETURN-DEVICE DN65 PN10 Z
Artikelnummer: 2017167
VVS-nummer:
Check Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 65 PN10.
GATE VALVE DN80 PN10 GG25 CPL.
Artikelnummer: 2017161
VVS-nummer:
Stop Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 65 PN10.
PRESSURE HOSE ID.70 PN8 SYN. 1
Artikelnummer: 2014151
VVS-nummer:
Pressure Hose:
 Intended for submersible pumps.
  • 10 m.
  • ø70 mm.
  • Max pressure 8 bar.
Pump foot DN50/65 KIT
Artikelnummer: 6064666
VVS-nummer:
Bottom foot Rexa:
  • Intended for Rexa pumps with connection DN 50/65.
Wilo-Control MS-Lift 1x4
Artikelnummer: 2539741
VVS-nummer:
EF-overensstemmelseserklæring

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikelnummer: 2539745
VVS-nummer:
EF-overensstemmelseserklæring

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikelnummer: 2543210
VVS-nummer:
EF-overensstemmelseserklæring

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikelnummer: 2543220
VVS-nummer:
EF-overensstemmelseserklæring

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DrainAlarm2
Artikelnummer: 2545133
VVS-nummer:

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikelnummer: 2519924
VVS-nummer:

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CAB
Artikelnummer: 2519921
VVS-nummer:

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikelnummer: 503211390
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikelnummer: 503211893
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikelnummer: 2004593
VVS-nummer:

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Weight for float switch (WA 65)
Artikelnummer: 2835532
VVS-nummer:
Float switch WA KR1 S
Artikelnummer: 6082807
VVS-nummer:

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Drain Alarm complete
Artikelnummer: 2835768
VVS-nummer: