Eksisterende pumpe - Afløp
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Rexa UNI-V05A/T008-540/A
Your advantages
- Excellent reliability due to corrosion-free hydraulics for universal application and various fluids
- Easy installation thanks to its light weight, integrated capacitor at the single-phase motor and flange with integrated fixation
- Optimum efficiency and operational safety thanks to its vortex hydraulics and smooth surfaces
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
- Long maintenance interval thanks to its double seal and a high volume sealing chamber
Submersible sewage pump for intermittent operation for stationary and portable wet well installation.
Application
Pumping of:
- Sewage containing faeces in accordance with EN 12050-1
- Wastewater
- Fluids with a pH value of > 4.5
- Material version "B": Aggressive fluids, e.g. lake/sea water, condensate, distilled water
- Winding temperature monitoring with bimetallic strip
- Submersible sewage pump with 10 m cable
- Operating and maintenance manual
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S2-15 min; S3 10%
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 – 40 °C, max. 60 °C for 3 min
- Free passage: 44 mm
- Cable length: 10 m
- Motor housing: 1.4301
- Hydraulics housing: PP-GF30 (copolymer)
- Impeller: PP-GF30 (copolymer)
- Static gaskets: NBR
- Sealing on pump side: SiC/SiC
- Sealing on motor side: NBR (V05), C/MgSiO4 (V06)
- Shaft end: Stainless steel 1.4401
Description/construction
Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation.
Hydraulics
The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 %. Vortex impellers are used as the impeller shape. A pump support foot is integrated into the hydraulics housing.
Motor
The motors available are surface-cooled motors in single-phase version (with built-in operating capacitor) and three-phase version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent periodic duty (S3).
Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.
The connection cable has a length of 10 m as standard and is available in following versions:
- With bare cable ends
- With plug
- With float switch and plug
There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The seal on the fluid side is provided by a mechanical seal.
- Made of cast iron.
- Comes complete with flange, bolts and nuts, as well as gaskets.
- Maximum pump weight 400kg.
- Made of acid-resistant steel (1.4401).
- Length 5 meters.
- Intended for pumps in the Rexa series.
- Connection DN 50 / 2RK.
- Hose DN 50/60 (PVC).
- 90 degrees.
- Intended for pumps in the Rexa series.
- Connection DN 50 PN10.
- Intended for pumps in the Rexa series.
- Connection DN 50 PN10.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Udskiftningspumpe Udskiftningblad
Bemærkninger
Produktinformation
Rexa MINI3 V04.13/M08-523/A-5m
Dine fordele
- Høj pålidelighed i kraft af korrosionsfri hydraulik til universelle anvendelser og forskellige pumpemedier
- Enkel installation takket være lav vægt, integreret kondensator med 1-faset motor og flange med integreret fastgørelse
- Optimal virkningsgrad og driftssikker takket være fristrømshydraulik og glatte overflader
- Hurtig vedligeholdelse takket være direkte adgang til tætningskammer og pumpehus
- Langt vedligeholdelsesinterval takket være dobbelt tætning og et tætningskammer med stort volumen
Spildevandsdykpumpe til intermitterende drift til stationær og transportabel vådinstallation
Anvendelse
Pumpning af:
- Spildevand med fækalier iht. EN 12050-1
- Snavset vand
- Pumpemedier med en pH-værdi på > 4,5
- Materialeversion „B“: Aggressive pumpemedier f.eks. sø- og havvand, kondensat, destilleret vand
- Viklingstemperaturovervågning med bimetalføler
- Spildevandsdykpumpe med 10 m kabel
- Drifts- og vedligeholdelseshåndbog
- Nettilslutning: 1~230 V, 50 Hz eller 3~400 V, 50 Hz
- Driftstype neddykket: S1
- Driftstype opdykket: S2-15 min; S3 10 %
- Kapslingsklasse: IP68
- Isoleringsklasse: F
- Medietemperatur: 3 - 40 °C, maks. 60 °C til 3 min.
- Fri passage: 44 mm
- Kabellængde: 10 m
- Motorhus: 1.4301
- Hydraulikhus: PP-GF30 (Copolymer)
- Pumpehjul: PP-GF30 (Copolymer)
- Statiske tætninger: NBR
- Pakning på pumpesiden: SiC/SiC
- Pakning på motorsiden: NBR (V05), C/MgSiO4 (V06)
- Akselende: Rustfrit stål 1.4401
Spildevandsdykpumpe som neddykkeligt blokaggregat til stationær og transportabel vådinstallation.
Hydraulik
Afgangen på tryksiden er udført som horisontale flangeforbindelser. Den maks. mulige tørsubstans er på 8 %. Som pumpehjulsform anvendes der friløbspumpehjul. En pumpefod er integreret i hydraulikhuset.
Motor
Der anvendes overfladekølede motorer i vekselstrøms- (med integreret driftskondensator) og trefasestrøms-version for direkte start. Varmen afgives direkte til det omgivende medium via motorhuset. Motorerne kan anvendes neddykket i permanent drift (S1) og opdykket i kortvarig drift (S2) eller intermitterende drift (S3).
Motorerne har desuden en termisk motorovervågning. Denne beskytter motorviklingen mod overophedning. Ved aggregater med en-fase-motor er disse integreret og selvkoblende. Dvs. at motoren frakobles ved overophedning og tilkobles igen automatisk efter afkølingen. Som standard anvendes i denne forbindelse bimetalfølere.
Tilslutningskablet har som standard et længde på 10 m og findes i følgende versioner:
- Med ledige kabelender
- Med stik
- Med flydekontakt og stik
Mellem motoren og hydraulikken befinder der sig et tætningskammer. Dette er fyldt med medicinsk hvidolie. Tætningen på mediesiden sker ved hjælp af glideringspakninger
- Intended for pumps in the Rexa series.
- Connection G 40.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Switching points: up ON / down OFF